Polycom MGC-100 Getting Started Manual Download Page 91

Page: 91 / 144

Chapter 5 - Basic Operations

5-11

Expand the On Going Conference or Reservation to list its participants.
The participants are listed below the conference or Reservation.

Different icons are used to indicate the participant roles and their
connection status. For details, see the

MGC Manager User’s Guide,

Volume I, Chapter 5

To list the participants in the

Status

pane:

Expand the

On Going Conferences

Reservations

tree.

Double-click the icon of the On Going Conference or Reservation whose
participants you want to list.
The participants are listed in the

Status

pane.

To list the participants in the

Status

pane:

Expand the

On Going Conferences

Reservations

tree to display the list

of On Going Conferences or Reservations.

Double-click the icon of the On Going Conference or Reservation whose
participants you want to list.
The participants are listed in the

Status

pane.

Summary of Contents for MGC-100

















































































































































Search results

Summary of Contents for MGC-100

Reviews:

Related manuals for MGC-100

Brands by name

Popular brands

Polycom MGC-100, Getting Started Manual

Search results

Summary of Contents for MGC-100

Reviews:

Related manuals for MGC-100

Brands by name

Popular brands