Polycom MGC-100 Getting Started Manual Download Page 54

Page: 54 / 144

MGC-50/MGC-100 Getting Started Guide

3-30

Define the following parameters:

10. Click

Next.

Table 3-10: DNS Settings Options

Field

Description

Use DNS Servers

Select:

•

Off

– DNS servers are not used in the network.

•

Specify

– to manually set the IP address of the

DNS servers.

•

Auto

– to automatically detect the DNS IP

address, if the DNS Server is defined in the
DHCP and the

DHCP -obtain IP Address

Automatically

option was selected in the

Settings

tab.

DNS Server Addresses

Primary DNS
Server IP Address

Specify

was selected, this field is mandatory. Enter

the IP address of the primary DNS server.

Secondary/Tertiary
DNS Server IP
Address

Specify

was selected, enter the IP address(es) of

the next DNS server in line to resolve domain names
as a fallback for the primary DNS server.
These fields are optional.

DNS Name

Local Domain
Name

Enter the domain name where the MCU is installed.
The name of the domain includes the host part of
URL or URI, for example,

polycom.com

Summary of Contents for MGC-100

















































































































































Search results

Summary of Contents for MGC-100

Reviews:

Related manuals for MGC-100

Brands by name

Popular brands

Polycom MGC-100, Getting Started Manual

Search results

Summary of Contents for MGC-100

Reviews:

Related manuals for MGC-100

Brands by name

Popular brands