Polycom MGC-100 Getting Started Manual Download Page 123

Page: 123 / 144

Chapter 7 - Defining a New Video Conference

7-5

Creating a Target Conference from an Entry
Queue

You can create a new On Going conference or Reservation with the same
parameters as the Entry Queue. This is especially useful for

Video Switching

conferences, since their parameters must be the same as those of the Entry
Queue. The

Entry Queue Access

and

Meet Me Per Conference

options are

automatically selected for this conference.

To create a target conference from an Entry Queue:

Right-click the

Entry Queues

icon, and then click

Create Reservation

from Entry Queue

The

Conference Properties - General

dialog box opens. The parameters

in the

General

and

Settings

tabs are automatically set to be compatible

with this Entry Queue.

If required, modify parameters, making sure not to change the line rate or
video settings. If these settings change, the Entry Queue and conference
will not be compatible.

Click the

Scheduler

tab to define the conference start date and time. The

current date and time are shown in the Scheduler dialog box. Do not
change them if you want to start an On Going Conference.

Define the conference start date and time.

Click

Summary of Contents for MGC-100

















































































































































Search results

Summary of Contents for MGC-100

Reviews:

Related manuals for MGC-100

Brands by name

Popular brands

Polycom MGC-100, Getting Started Manual

Search results

Summary of Contents for MGC-100

Reviews:

Related manuals for MGC-100

Brands by name

Popular brands