Polycom MGC-100 Getting Started Manual Download Page 108

Page: 108 / 144

MGC-50/MGC-100 Getting Started Guide

6-2

The

Entry Queue Properties

dialog box opens.

In the

Name

box, specify a name for the Entry Queue using up to 20

characters.

In the

Numeric ID

box, enter a unique per MCU number (default length

is four digits), or leave this field empty to let the NCU assign one when
the Entry Queue definition is completed.

In the

Entry Queue Service

box, select the Entry Queue Service that will

be used to play voice messages that will guide participants through their
connection process. Leave this field blank to use the default Entry Queue
Service if one is defined.

Select the

Audio Only

check box.

To allow VTX 1000 users to connect to the Entry Queue, select the

VTX 1000

check box.

Select the

IP Only

check box to define an IP-Only conference. This

enables the Audio Algorithm selection for the target conference.

If you selected the

IP Only

option, you can select the Entry Queue to be

Encrypted, and you can select the audio algorithm to use by VoIP

Summary of Contents for MGC-100

















































































































































Search results

Summary of Contents for MGC-100

Reviews:

Related manuals for MGC-100

Brands by name

Popular brands

Polycom MGC-100, Getting Started Manual

Search results

Summary of Contents for MGC-100

Reviews:

Related manuals for MGC-100

Brands by name

Popular brands