Polycom MGC-100, Getting Started Manual

Page: 74 / 144

MGC-50/MGC-100 Getting Started Guide
3-50
By default, the first IP Network Service you define is set as the system
default. When defining additional IP Network Services this default can
be changed. For more details, see the
MGC Administrator’s Guide,
Chapter 3 .
Assigning Network Services to the IP/IP+ Cards
For each IP card installed in the MCU, you need to define which Network
Service is used, thereby defining the network properties connected to that
card. Usually, one Network Service is used for all IP cards, enabling the MCU
to automatically manage the conferencing resources.
The association between the network properties and the IP cards is done in
two stages. In the first stage, while defining the IP Network Service, you add
all the IP cards that can use this Network Service. In the second stage, you
define for each IP card which Network Service it uses to manage
conferencing calls.
To assign IP service settings to the IP card:
1. In the Browser area, expand the MCU tree.
2. Expand the MCU Configuration tree.
3. Expand the Cards tree.