POLMAR Shark2, User Manual

Page: 32 / 108

32
2. Ascoltare il canale per un annuncio da parte del natante che ha inviato la
chiamata.
5.3.6 Gestione delle chiamate in arrivo mentre l’apparato è in uso
Quando la radio è impegnata nella gestione di una chiamata automatica non
di emergenza e riceve una chiamata automatica di Emergenza,
la ricezione di un altro messaggio DSC pertinente alla stazione, ma non alla pro-
cedura automatica attualmente attiva, viene gestito come descritto di seguito:
1. Se l’apparato è impegnato in una chiamata e viene ricevuta una chiamata
DSC con un livello di priorità superiore a quello della chiamata in corso la
radio visualizzerà come segue:
Allo stesso tempo, l’icona “non letto” (unread) lampeggerà, se viene se-
lezionato “YES”, la radio visualizzerà il contenuto della nuova chiamata e
l’icona “non letto” (unread) sparirà. Se si seleziona “NO” la nuova chiamata
sarà automaticamente salvata nel relativo registro delle chiamate (call log)
e l’icona “non letto“ (unread) lampeggerà fino a quando l’operatore leggerà
la nuova chiamata nel registro delle chiamate (call log).
Verrà emesso un segnale acustico distinto. La radio non passerà su nessun
canale specifico a causa della nuova chiamata a meno che l’operatore ac-
cetti manualmente la nuova chiamata.
2. Se la radio è impergnata in una chiamata e viene ricevuta una chiamata
DSC con una priorità inferiore rispetto a quella attualmente in corso, il di-
splay visualizzerà come sotto riportato:
Contemporaneamente verrà emesso un segnale acustico distinto e questo avvi-
so di informazione restetrà visualizzato per 5 secondi, anche il segnale acustico
terminerà dopo i 5 secondi, quindi lo schermo tornerà a visualizzare i dati della
3) LL reply set to OFF
POSITION
REQUEST FROM
̷
LL REPLY OFF
KEY
$
SILENCE
CANCEL
$
EXIT
̵
5.3.4 Receiving a ಯ Position Reply ರ call
1. When ಯ Position Reply ರ received the Alert tone sound and the ಯ POSITION ACK ರ
message on st line and display the sender GPS data
2. The time position could be stored and able to output to the NMEA port for
external Chart plotter.
POSITION
REPLY FROM
̷
5.3.5 Receiving a geographic area call
A GEOGRAPHIC AREA CALL are received by vessels by within a specific
geographical boundary area.
1. When you receive notification of a geographical call press any key to cancel the
alert. The radio tunes to the disgnated channel by press ENT key or CANCEL key to
normal mode with original channel. The time and the user MMSI are displayed on
the screen and the call data is stored in the call log.
2. Monitor the working channel for an announcement from the calling vessel.
GEOGRAPHICAL
CALL FROM
̷
5.3.6 Handling incoming calls while the equipment is engaged
When radio is engaged in handling an non-distress automated procedure and a
received distress call automated procedure received another DSC messages that
are pertinent to the station but not the currently active automated procedure are
handled as described in as below
1) If the equipment is engaged on a call and a DSC call is received with a higher
priority than the current call the equipment will display as below
NEW CALL
ACCEPT
%
$
YES
NO
LOW P CALL
IS RECEIVED
3) LL reply set to OFF
POSITION
REQUEST FROM
̷
LL REPLY OFF
KEY
$
SILENCE
CANCEL
$
EXIT
̵
5.3.4 Receiving a ಯ Position Reply ರ call
1. When ಯ Position Reply ರ received the Alert tone sound and the ಯ POSITION ACK ರ
message on st line and display the sender GPS data
2. The time position could be stored and able to output to the NMEA port for
external Chart plotter.
POSITION
REPLY FROM
̷
5.3.5 Receiving a geographic area call
A GEOGRAPHIC AREA CALL are received by vessels by within a specific
geographical boundary area.
1. When you receive notification of a geographical call press any key to cancel the
alert. The radio tunes to the disgnated channel by press ENT key or CANCEL key to
normal mode with original channel. The time and the user MMSI are displayed on
the screen and the call data is stored in the call log.
2. Monitor the working channel for an announcement from the calling vessel.
GEOGRAPHICAL
CALL FROM
̷
5.3.6 Handling incoming calls while the equipment is engaged
When radio is engaged in handling an non-distress automated procedure and a
received distress call automated procedure received another DSC messages that
are pertinent to the station but not the currently active automated procedure are
handled as described in as below
1) If the equipment is engaged on a call and a DSC call is received with a higher
priority than the current call the equipment will display as below
NEW CALL
ACCEPT
%
$
YES
NO
LOW P CALL
IS RECEIVED
3) LL reply set to OFF
POSITION
REQUEST FROM
̷
LL REPLY OFF
KEY
$
SILENCE
CANCEL
$
EXIT
̵
5.3.4 Receiving a ಯ Position Reply ರ call
1. When
ಯ
Position Reply
ರ
received the Alert tone sound and the
ಯ
POSITION ACK
ರ
message on st line and display the sender GPS data
2. The time position could be stored and able to output to the NMEA port for
external Chart plotter.
POSITION
REPLY FROM
̷
5.3.5 Receiving a geographic area call
A GEOGRAPHIC AREA CALL are received by vessels by within a specific
geographical boundary area.
1. When you receive notification of a geographical call press any key to cancel the
alert. The radio tunes to the disgnated channel by press ENT key or CANCEL key to
normal mode with original channel. The time and the user MMSI are displayed on
the screen and the call data is stored in the call log.
2. Monitor the working channel for an announcement from the calling vessel.
GEOGRAPHICAL
CALL FROM
̷
5.3.6 Handling incoming calls while the equipment is engaged
When radio is engaged in handling an non-distress automated procedure and a
received distress call automated procedure received another DSC messages that
are pertinent to the station but not the currently active automated procedure are
handled as described in as below
1) If the equipment is engaged on a call and a DSC call is received with a higher
priority than the current call the equipment will display as below
NEW CALL
ACCEPT
%
$
YES
NO
LOW P CALL
IS RECEIVED