83
At the same time, the unread icon will flash, if you select “YES”,radio will
display the new call content and the unread icon will disappear. If you se
-
lect the “NO” the new call will automatic saved to relevant call log and the
unread icon will flash until user read the new call from call log.
A discrete audible alarm will sound. The radio will not change to any channel
specified in the new call unless the operator manually accepts the new call.
2. If the equipment is engaged on a call and a DSC call is received with a
lower priority than the current call the equipment will display as below:
At the same time a discrete audible alarm will sound and this prompt
information will remain for 5s and the self terminate alarm will sound
continue for 5s.then screen will return to display call content of before. If
the low priority call interrupt the alarm of before call, the previously call’s
alarm will sound continue.
Once the auto procedure (except send DISTR auto procedure) is terminat
-
ed either by the user or automatic timeout, the equipment will automati
-
cally display any unread messages in memory, starting with the message
with the highest priority.
5.4 dIsTREss AuTO PROcEduRE
5.4.1 send distress auto procedure (sending a distress call)
Note: Only having a MMSI code of your radio and DSC enable, can you initiate
a DSC transmission? To enter the MMSI code see 6.9.1
1. Open the red cover labelled DISTRESS.
2. Press the DISTRESS key momentarily. The Text area of the display recon
-
figures to show the Nature of Distress menu
3. If time is available, rotate the CH knob to select the Nature of Distress, the
default are “UNDEFINED”.
4. Hold down the DISTRESS key for more than 3 seconds until you see the
distress call sent message on the screen. The whole display screen to flash
and beep loudly.
5. If DISTRESS key is released before 3 seconds, the initiation of distress call
is terminate and If button is pressed for more than 3 seconds, Distress
call is sent from channel 70 when channel 70 is free, and if channel 70 is
3) LL
reply
set
to
OFF
POSITION
REQUEST
FROM
̷
LL
REPLY
OFF
KEY
$
SILENCE
CANCEL
$
EXIT
̵
5.3.4 Receiving a
ಯ
Position Reply
ರ
call
1.
When
ಯ
Position Reply
ರ
received
the
Alert
tone
sound
and
the
ಯ
POSITION ACK
ರ
message
on
st
line
and
display
the
sender
GPS
data
2.
The
time
position
could
be
stored
and
able
to
output
to
the
NMEA
port
for
external
Chart
plotter.
POSITION
REPLY
FROM
̷
5.3.5 Receiving a geographic area call
A GEOGRAPHIC AREA CALL are received by vessels by within a specific
geographical boundary area.
1.
When
you
receive
notification
of
a
geographical
call
press
any
key
to
cancel the
alert. The radio tunes to the disgnated channel by press ENT key or CANCEL key to
normal mode with original channel. The time and the user MMSI are displayed on
the screen and the call data is stored in the call log.
2.
Monitor
the
working
channel
for
an
announcement
from
the
calling vessel.
GEOGRAPHICAL
CALL
FROM
̷
5.3.6 Handling incoming calls while the equipment is
engaged
When radio is
engaged
in
handling
an
non-distress automated procedure
and
a
received
distress
call
automated procedure
received
another
DSC
messages
that
are
pertinent
to
the
station but
not the currently active automated procedure are
handled as described in
as
below
1) If the equipment is engaged on a call and a DSC call is received with a higher
priority than the current call the
equipment will display
as
below
NEW
CALL
ACCEPT
%
$
YES
NO
LOW
P
CALL
IS
RECEIVED
3) LL
reply
set
to
OFF
POSITION
REQUEST
FROM
̷
LL
REPLY
OFF
KEY
$
SILENCE
CANCEL
$
EXIT
̵
5.3.4 Receiving a
ಯ
Position Reply
ರ
call
1.
When
ಯ
Position Reply
ರ
received
the
Alert
tone
sound
and
the
ಯ
POSITION ACK
ರ
message
on
st
line
and
display
the
sender
GPS
data
2.
The
time
position
could
be
stored
and
able
to
output
to
the
NMEA
port
for
external
Chart
plotter.
POSITION
REPLY
FROM
̷
5.3.5 Receiving a geographic area call
A GEOGRAPHIC AREA CALL are received by vessels by within a specific
geographical boundary area.
1.
When
you
receive
notification
of
a
geographical
call
press
any
key
to
cancel the
alert. The radio tunes to the disgnated channel by press ENT key or CANCEL key to
normal mode with original channel. The time and the user MMSI are displayed on
the screen and the call data is stored in the call log.
2.
Monitor
the
working
channel
for
an
announcement
from
the
calling vessel.
GEOGRAPHICAL
CALL
FROM
̷
5.3.6 Handling incoming calls while the equipment is
engaged
When radio is
engaged
in
handling
an
non-distress automated procedure
and
a
received
distress
call
automated procedure
received
another
DSC
messages
that
are
pertinent
to
the
station but
not the currently active automated procedure are
handled as described in
as
below
1) If the equipment is engaged on a call and a DSC call is received with a higher
priority than the current call the
equipment will display
as
below
NEW
CALL
ACCEPT
%
$
YES
NO
LOW
P
CALL
IS
RECEIVED
3) LL
reply
set
to
OFF
POSITION
REQUEST
FROM
̷
LL
REPLY
OFF
KEY
$
SILENCE
CANCEL
$
EXIT
̵
5.3.4 Receiving a
ಯ
Position Reply
ರ
call
1.
When
ಯ
Position Reply
ರ
received
the
Alert
tone
sound
and
the
ಯ
POSITION ACK
ರ
message
on
st
line
and
display
the
sender
GPS
data
2.
The
time
position
could
be
stored
and
able
to
output
to
the
NMEA
port
for
external
Chart
plotter.
POSITION
REPLY
FROM
̷
5.3.5 Receiving a geographic area call
A GEOGRAPHIC AREA CALL are received by vessels by within a specific
geographical boundary area.
1.
When
you
receive
notification
of
a
geographical
call
press
any
key
to
cancel the
alert. The radio tunes to the disgnated channel by press ENT key or CANCEL key to
normal mode with original channel. The time and the user MMSI are displayed on
the screen and the call data is stored in the call log.
2.
Monitor
the
working
channel
for
an
announcement
from
the
calling vessel.
GEOGRAPHICAL
CALL
FROM
̷
5.3.6 Handling incoming calls while the equipment is
engaged
When radio is
engaged
in
handling
an
non-distress automated procedure
and
a
received
distress
call
automated procedure
received
another
DSC
messages
that
are
pertinent
to
the
station but
not the currently active automated procedure are
handled as described in
as
below
1) If the equipment is engaged on a call and a DSC call is received with a higher
priority than the current call the
equipment will display
as
below
NEW
CALL
ACCEPT
%
$
YES
NO
LOW
P
CALL
IS
RECEIVED
Summary of Contents for Shark2
