POLMAR Shark2, User Manual

Page: 68 / 108

68
8. Change the angle after installation:
Loosen the mounting knob at the sides of gimbal first.
Then adjust the base station to an appropriate direction with matching of
the protuberances on the inner sides of gimbal and pits on the outer sides
of base station.
Tighten the knob to secure.
3.5 Antenna mounting/the EmE exposure
For optimal radio performance and minimal human exposure to radio fre -
quency electromagnetic energy, make sure the antenna is:
• Connected to the radio before transmitting;
• Properly mounted;
• Locate where it will be away from people:
• Locate at least three feet (91 cm) from the Base Station transceiver and
Handsets;
• Use standard type of PL259 connector
3.6 mounting the handset
Find a mounting location near the base station to mount the wall hanger for
handset. The distance between the base station and the wall hanger should
be less than the length of the handset cable.