POLMAR Shark2, User Manual

Page: 70 / 108

70
4.2.2 memo (fAv) mode
Press and hold the HI/lO/mEmO button while in normal operation
mode to enter Mem mode, icon indicator appears on LCD.
On the Mem Mode rotate the CH knob displays only the channels that you
have saved to memory, which enables you to easily use your favorite channels
while bypassing unwanted or seldom- used channels during a scan.
While in Mem Mode:
Press and release the scAN key to start Memory scan mode.
Press and release the scAN key to stop Memory scan mode.
4.3 save memory (fAv) channels
You can store all band of voice channels.
Program the FAV channel and store Process as follow:
1. At normal mode, tune to the desired channel and then press and hold the
BAND/SAVE key to save it as Favorite channel. The icon will be turned
on for indication that channel be saved in FAV list.
2. Then tune to next desired channel and repeat the keystroke sequences till
all desired channels be programmed / saved.
3. Delete the channel from the FAV list at Normal mode. Select the target
channel with icon ON. Press and hold the BAND/SAVE key till the icon
turns OFF. The target channel will then be deleted out from the FAV list.
Repeat the keystroke operation for those unwanted channels.
4. If no channel has been programmed, an error beep occurs with indicate
error message.
4.4 Transmit Time-Out Timer (TOT)
When the PTT button on the microphone is held down, transmit time is limited
to 5 minutes. This will avoid unintentional transmissions.
About 10 seconds before automatic transmitter shutdown, a warning beep will
be heard from the speaker(s).
The transceiver will automatically go to receive mode. Please remember, that
marine channels should be kept occupied for a shorter time possible. Wait 30
seconds on receiving mode before transmitting.
To transmit again, the PTT button must be released and then pressed again.