POLMAR Shark2, User Manual

Page: 95 / 108

95
6.9.2 maintain groups
You can program up to three group MMSI numbers and associated Group
names, group MMSI numbers always begin with a zero (0). You only enter the
last 8digits of the group ID number, the intial “0” is automatically entered.
6.9.2.1 Enter your groups
1. Select GROUP SETUP and the cursor is at <MANUAL NEW>. If an exist -
ing names & MMSI data are stored, the values appear. If is blank, Only
MANUAL NEW appear on LCD.
2. The entry procedures are same as that of the BUDDY LIST.
6.9.2.2 Edit user groups
1. Select DSC SET/UP then GROUP SETUP and press the CH knob. The exist -
ing names & MMSI data are displayed on screen. Select the Group name
or, only the MMSI that you wanted.
2. Press the CH knob to edit. The entry procedures are same as that of the
BUDDY LIST.
3. When the edition is finish press the CH knob to store the changes and
return to the GROUP MMSI screen.
6.9.2.3 delete a group
1. Select GROUP SETUP and press the CH knob. The existing group names
are displayed on screen.
2. Select that you wanted delete and press the CH knob will display EDIT or
DELETE item.
3. Select DELETE and press the CH knob will display DELETE GROUP menu
arrow point the YES, then press the CH knob to empty the group and re -
turn to the GROUP SETUP screen. The LCD displays the group as follow.
GROuP sETuP
mANuAl NEW
>EIlEEN
fRIENds
EIlEEN
053421608
>EdIT
dElETE
EdIT NAmE
>EIlEEN
EdIT mmsI
053421608
EIlEEN
053421608
EdIT
>dElETE
dElETEGROuP
EIlEEN
>yEs
NO
GROuP sETuP
mANuAl NEW
>fRIENds
cHANG
dsc sETuP
usER mmsI
>GROuP sETuP
ATIs mmsI
GROuP sTuP
>mANuAl NEW
EIlEEN
GROuP NAmE
>> _ _ _ _ _ _ _ _
GROuP mmsI
O _ _ _ _ _ _ _ _