POLMAR Shark2, User Manual

Page: 88 / 108

88
6.2 set-up menu navigation
To access the Menu Mode:
Press the 16 or CANCEL key or else select the EXIT option from the menu.
Rotate the CH knob to select the Item within the Set-Up Menu list To confirm
a selected item for adjustment, push the CH knob.
When the desired setting is done, press the CH knob to enter the setting, and
move back to the Main Menu list.
Set Up operation is exited by turning the unit off. All changes are saved in
EEPROM.
6.3 buddy list
the Buddy List can store up to 20 entries with Name and MMSI. User can add,
edit or delete the record from the list under this submenu.
Press and hold MENU/DSC key, Text area displays the Set-Up Menu list.
To exit the Menu mode or sub –mode:
6.3.1 Adding an entry
1. Select Buddy List and the cursor is at <NEW> press CH knob entry page
which prompt up to allow enter Name and MMSI.
2. Rotate the CH knob to select the first desired character (A-Z, 1-9, Space
and Back Arrow “ <”) for the name. When the desired character is shown,
push the CH knob to enter, Same select the next character s, The char -
acters can be up to 11. When the last digit is entered, the activation ad -
vances to the first MMSI digit.
3. Enter the MMSI associated with that buddy name (this must be numeric)
Prefix 00 will treat as Coast Once 9 digit be entered, pops up a new page
to ask for confirmation to save.
4. Press the CH knob to save the new entry, which is displayed at the top of
your BUDDY LIST.
5. Press CANCEL will terminate the process without saving go back to Buddy
list page.
6. When the buddy list is full. you can make a new entry and the buddy at
the end of the list is automatically erased.
6.3.2 Edit existing entry
1. Pick up one from BUDDY list and edit Press CH knob one Page pops up
item for you to edit or delete, Choose EDIT.
2. When you have finished editing, press CH knob into a new page prompt in
to ask for confirmation to save.
3. Press the CH knob to save the new edit. The BUDDY list is displayed again.
If more changes are required repeat steps from 1 to 3 otherwise, press
cancel to exit.