66
Remove the front lens cap.
Turn the focusing ring to the close-up position. Grip the outer edge of the front lens assembly.
Twist hard in a counterclockwise direction. Unscrew front lens assembly. Clean lens. Replace
front lens cap. Store lens.
Note: Any disassembly of the lens system will require collimation of the lens.
Figure 4-57. Front lens assembly, 75MM lens
Remove the PC flash connector socket and separate the contact lug as shown in Figure 4-50.
Remove the rear lens cap (Figure 4-58).
Figure 4-58. Rear lens assembly, 75MM lens
Use a strap wrench to loosen the rear lens assembly. Hold the lens barrel with the rear lens
Front Lens Assembly
Lens Identification Ring
Front Lens Cap
Rear Lens Cap
Rear Lens Assembly
Washer (Shim)
Summary of Contents for 600SE
Page 7: ...7 NOTES...
