25
Problems Evidenced in Pictures (Con't)
Problems
Probable Cause
Corrective Action
Picture fogged
1. Sponge filters missing
1. Replace filler sponges on camera
(light leak).
from camera body.
body
2. Film holder door hinge loose 2. Repair or replace door on film
or broken.
holder or replace film holder.
3. Camera body cracked.
3. Repair or replace camera body.
Pictures are light
1. Improperly seated film
1. Reseat film holder.
struck in one area
holder.
2. Improperly seated film
2. Reset film holder adapter plate.
adapter.
3. Improperly seated film
pack.
3. Reseat film pack.
4. Cracked film holder.
4. Replace film holder
5. Failure to completely close
5. Make sure dark slide is fully
from camera dark slide
closed before removing the
before removing film holder.
film holder form camera.
6. Screws loose on film holder 6. Tighten screws on film holder
base.
base.
7. Film holder springs weak
7. Replace film holder.
or broken.
8. Missing or deformed light
8. Replace light seals.
seals.
9. Shutter not closing fully.
9. Check for defective shutter cable
and/or actuating mechanism.
If defective, replace. If OK., repair
or replace shutter.
Pictures not properly 1. RF/VF framing error.
1. Perform RF/VF framing
framed.
adjustments.
2. RF/VF defective.
2. Repair or replace RF/VF
Summary of Contents for 600SE
Page 7: ...7 NOTES...
