83
Figure 5-9. Camera lined up with aiming circle
4. Remove tape from shutter release. Remove focal plane plate from film holder. Load a 107 or
108 film pack. Remove film pack dark slide.
5. Move the tripod back from the target, as follows:
Lens
Suggested Distance
127mm
80.5 inches (2 meters)
150mm
96 inches (2.5 meters)
75mm
44 inches (1.2 meters)
Note:
The same suggested distances apply to the near-distance tracking error test
procedure. On the Model 600SE camera, complete tests on a single lens at the
suggested tripod position., Then move tripod to next position and complete tests
for the additional lenses.
6. Look through the viewfinder eyepiece. Try to position the camera so that the albada lines
lineup with the target framing lines as shown in Figure 5-10.
View each corner separately. Make sure the albada lines are between the target lines and
are spaced evenly left to right.
a. Test 127mm lens first. Move viewfinder selector switch to the 127 position.
b. When testing the 150mm lens make sure the 150 position is set by the viewfinder selector
switch.
Summary of Contents for 600SE
Page 7: ...7 NOTES...
