72
platform. The blocks and rollers must be pulled straight up and out of the grooves.
Do not cock the rollers while withdrawing the assembly.
Note:
Although it may not be necessary to replace both rollers, it is necessary to
replace the pair of rollers as an assembly.
CAUTION
Do not reinstall a bearing block that is cracked or broken.
7. Install the bearing blocks on the rollers.
8. Refer to Figure 4-65. Slide the roller assembly into the dovetail grooves in the platform.
9. Using special tool 11606, spread one of the load springs and, holding the tool and spring
together, slide the spring into the platform. The spring must slide between the inner
surface of the platform and the plastic projection marked A on Figure 4-65.
Figure 4-65. Mini-roller spread system
B
A
D
Bearing Block
Left side (White)
Load Spring
Rollers
Bearing Block
Right Side (White)
Load Spring
Platform
Edge Control Spring
Edge Control Bar
C
Summary of Contents for 600SE
Page 7: ...7 NOTES...
