Polaris RZR XP 1000, Service Manual

Page: 319 / 539

7
7.7
9925724 R01 - 2014-2015 RZR XP 1000 / RZR XP4 1000 Service Manual
© Copyright 2014 Polaris Industries Inc.
7. CAUTION: Do not hang the caliper by the brake line.
Use wire to hang caliper to prevent damage to the
brake line.
8. Remove the rear wheel hub and brake disk
assembly.
9. Remove the five remaining bolts
6
that attach the
rear bearing carrier to the trailing arm. Discard the
nuts.
10. Remove the bearing carrier from the rear drive shaft
and trailing arm.
11. Rotate bearing by hand and check for smooth
rotation. Visually inspect bearing for moisture, dirt, or
corrosion.
NOTE: Due to extremely close tolerances and
minimal wear, the bearings must be inspected
visually, and by feel. While rotating bearings by
hand, inspect for rough spots, discoloration, or
corrosion. The bearings should turn smoothly
and quietly, with no detectable up and down
movement and minimal movement sideways
between inner and outer race.
12. Replace bearing if moisture, dirt, corrosion, or
roughness is evident.
FINAL DRIVE