3
3.39
9925724 R01 - 2014-2015
RZR
XP 1000 /
RZR
XP4 1000 Service Manual
© Copyright 2014 Polaris Industries Inc.
Valve Inspection
1.
Remove all carbon from valves with a soft wire wheel
or brush.
2.
Check valve face for runout, pitting, and burnt spots.
To check for bent valve stems, mount valve in a drill
or use “V” blocks and a dial indicator.
3.
Check the end of the valve stem for flaring, pitting,
wear or damage.
4.
Inspect split keeper groove for wear or flaring in the
keeper seat area.
NOTE:
The valves can be re-faced or end
ground, if necessary. They must be replaced if
extensively worn, burnt, bent or damaged.
5.
Measure diameter of valve stem with a micrometer in
three places, then rotate 90° and measure again
(take
six
measurements
total).
Compare
to
specifications.
Valve Stem Diameter:
Intake:0.2155 - 0.2161" (5.475 - 5.490 mm)
Exhaust: 0.2147 - 0.2153" (5.455 - 5.470 mm)
6.
Measure valve guide inside diameter at the top,
middle and end of the guide using a small hole
gauge and a micrometer. Measure in two directions.
Valve Guide I.D.:
0.2165 - 0.2171" (5.500 - 5.515 mm)
ENGINE / COOLING SYSTEM
Summary of Contents for RZR XP 1000
