Polaris 2009 Hawkeye 2X4 Owner'S Manual Download Page 73

Page: 73 / 124

MAINTENANCE

Brake Fluid

Hand Brake

The master cylinder is located

on the left handlebar. Main-

tain the fluid level 1/4" (6.3

mm) below the top edge of the

master cylinder. Do not over-

fill.
1. Position the vehicle on a

level surface. Make sure

the handlebars are

straight.

2. View the fluid level

through the indicator win-

dow (eye) on the top of

the master cylinder.

NOTE:

The eye will appear

dark when the fluid

level is full. When fluid

is low, the eye will be

clear.

3. Add the recommended

fluid as needed. Do not

overfill.

Foot Brake

The brake fluid reservoir is

located on the right side of the

vehicle. Maintain the fluid

level between the minimum

and maximum marks. Do not

overfill.

Master Cylinder

Indicator

Window

Minimum

Maximum

Full

Low

Summary of Contents for 2009 Hawkeye 2X4





























































































































Search results

Summary of Contents for 2009 Hawkeye 2X4

Reviews:

Related manuals for 2009 Hawkeye 2X4

Brands by name

Popular brands

Polaris 2009 Hawkeye 2X4, Owner'S Manual

Search results

Summary of Contents for 2009 Hawkeye 2X4

Reviews:

Related manuals for 2009 Hawkeye 2X4

Brands by name

Popular brands