Polaris 2009 Hawkeye 2X4 Owner'S Manual Download Page 27

Page: 27 / 124

FEATURES AND CONTROLS

Auxiliary Foot Brake

The auxiliary brake system is intended to be used as a backup for the

main brake system. Should the main system fail, use the auxiliary foot

brake.

The auxiliary foot brake is

located on the inside of the

right footrest. Operate this

brake with your right foot.

NOTE:

If the rear wheels slide

while using the auxiliary

brake,

reduce

brake

pedal pressure to brake

the rear wheels without

skidding.

Check the brake fluid level frequently for the auxiliary brake system.

See page 71.

WARNING

Aggressively applying the auxiliary brake when backing down a hill may

cause rear tipover, which could result in serious injury or death.
Use caution when applying the auxiliary brake. Do not aggressively apply the

auxiliary brake when going forward. The rear wheels may skid and slide side-

ways, causing loss of control and serious injury or death.

Auxiliary Foot Brake

Summary of Contents for 2009 Hawkeye 2X4





























































































































Search results

Summary of Contents for 2009 Hawkeye 2X4

Reviews:

Related manuals for 2009 Hawkeye 2X4

Brands by name

Popular brands

Polaris 2009 Hawkeye 2X4, Owner'S Manual

Search results

Summary of Contents for 2009 Hawkeye 2X4

Reviews:

Related manuals for 2009 Hawkeye 2X4

Brands by name

Popular brands