Polaris 2009 Hawkeye 2X4 Owner'S Manual Download Page 74

Page: 74 / 124

MAINTENANCE

Brakes

The front and rear brakes are hydraulic disc brakes, activated by moving

the single brake lever toward the handlebar. The auxiliary foot brake is

also hydraulic. Both brake systems are self-adjusting.

Brake Inspections

The following checks are recommended to keep the brake system in

good operating condition. Check more often if brakes are used heavily

under normal operation.
1. Always keep brake fluid at an

adequate level. See page 70.

2. Check the brake system for

fluid leaks.

3. Check the brakes for excessive

travel or spongy feel.

4. Check the friction pads for

wear, damage and looseness.

Replace the pads when the fric-

tion material is worn to .03" (.8

mm).

5. Check the security and surface

condition of the disc.

.03" (.8 mm)

Summary of Contents for 2009 Hawkeye 2X4





























































































































Search results

Summary of Contents for 2009 Hawkeye 2X4

Reviews:

Related manuals for 2009 Hawkeye 2X4

Brands by name

Popular brands

Polaris 2009 Hawkeye 2X4, Owner'S Manual

Search results

Summary of Contents for 2009 Hawkeye 2X4

Reviews:

Related manuals for 2009 Hawkeye 2X4

Brands by name

Popular brands