Polaris 2009 Hawkeye 2X4 Owner'S Manual Download Page 20

Page: 20 / 124

SAFETY

Safe Riding Gear

Always wear protective clothing to reduce the chance of injury.

Helmet

Always wear a helmet that meets or exceeds established safety stan-

dards.
Approved helmets in the USA and Canada bear a U.S. Department of

Transportation (DOT) label.
Approved helmets in Europe, Asia and Oceania

bear the ECE 22.05 label. The ECE mark consists

of a circle surrounding the letter E, followed by the

distinguishing number of the country which has

granted approval. The approval number and serial

number will also be displayed on the label.

Helmet

Eye Protection

Gloves

Boots

Long Pants

Long

Sleeves

051039

0006.31

Summary of Contents for 2009 Hawkeye 2X4





























































































































Search results

Summary of Contents for 2009 Hawkeye 2X4

Reviews:

Related manuals for 2009 Hawkeye 2X4

Brands by name

Popular brands

Polaris 2009 Hawkeye 2X4, Owner'S Manual

Search results

Summary of Contents for 2009 Hawkeye 2X4

Reviews:

Related manuals for 2009 Hawkeye 2X4

Brands by name

Popular brands