Polaris 2009 Hawkeye 2X4 Owner'S Manual Download Page 26

Page: 26 / 124

FEATURES AND CONTROLS

Parking Brake

Locking the Parking Brake

1. Place the transmission in

gear.

2. Squeeze and release the brake

lever two or three times, then

squeeze and hold.

3. Push the parking brake lock

forward to engage the lock.

4. Release the brake lever.
5. To release the parking brake lock, squeeze and release the brake

lever. It will return to its unlocked position.

Important Safeguards

• The parking brake may relax if left on for a long period of time.

Always block the wheels to prevent rolling.

• Always block the wheels on the downhill side of this vehicle if leav-

ing it parked on a hill. Another option is to park in a sidehill position.

• Never depend on the parking brake alone if this vehicle is parked on a

hill. Always block the wheels to prevent rolling.

WARNING

Operating this vehicle while the parking brake is engaged could result in an

accident and serious injury or death. Always check to be sure the parking

brake is disengaged before operating.

Summary of Contents for 2009 Hawkeye 2X4





























































































































Search results

Summary of Contents for 2009 Hawkeye 2X4

Reviews:

Related manuals for 2009 Hawkeye 2X4

Brands by name

Popular brands

Polaris 2009 Hawkeye 2X4, Owner'S Manual

Search results

Summary of Contents for 2009 Hawkeye 2X4

Reviews:

Related manuals for 2009 Hawkeye 2X4

Brands by name

Popular brands