Polaris 2009 Hawkeye 2X4 Owner'S Manual Download Page 101

Page: 101 / 124

MAINTENANCE

Cleaning and Storage

Storage Tips

Inspect and Lubricate

Inspect all cables and lubricate all areas of the vehicle as recommended

in the Periodic Maintenance Chart beginning on page 54.

Battery Storage

See pages 91-92 for storage and charging procedures.

Storage Area/Covers

Set the tire pressure and safely support the vehicle with the tires slightly

off the ground. Be sure the storage area is well ventilated. Cover the

vehicle with a genuine Polaris cover.

NOTE:

Do not use plastic or coated materials. They do not allow enough ven-

tilation to prevent condensation, and may promote corrosion and oxi-

dation.

Accessories

Auxiliary power outlets provide 12-volt power for operating accesso-

ries. Accessory outlets are available for all models. Polaris also has a

wide range of additional accessories available for your vehicle. Always

install accessories that are approved for use with this vehicle. Please see

your Polaris dealer.

Summary of Contents for 2009 Hawkeye 2X4





























































































































Search results

Summary of Contents for 2009 Hawkeye 2X4

Reviews:

Related manuals for 2009 Hawkeye 2X4

Brands by name

Popular brands

Polaris 2009 Hawkeye 2X4, Owner'S Manual

Search results

Summary of Contents for 2009 Hawkeye 2X4

Reviews:

Related manuals for 2009 Hawkeye 2X4

Brands by name

Popular brands