Polaris 2009 Hawkeye 2X4 Owner'S Manual Download Page 99

Page: 99 / 124

MAINTENANCE

Cleaning and Storage

Storage Tips

Clean the Exterior

Make any necessary repairs and clean the vehicle as recommended. See

page 94.

Stabilize the Fuel

1. Fill the fuel tank.
2. Add Polaris Carbon Clean Fuel Treatment or Polaris Fuel Stabilizer.

Follow the instructions on the container for the recommended

amount.

NOTE:

Carbon Clean removes water from fuel systems, stabilizes fuel and

removes carbon deposits from pistons, rings, valves and exhaust sys-

tems.

3. Allow the engine to run for 15-20 minutes to allow the stabilizer to

disperse through the fuel in the tank and carburetor.

4. Turn the fuel valve off.
5. Drain the carburetor bowl.

Oil and Filter

Change the oil and filter. See page 62.

Air Filter / Air Box

1. Inspect and clean (or replace) the pre-cleaner and air filter.
2. Clean the air box.
3. Clean or replace the breather filter.
4. Drain the sediment tube.

Recoil Housing

1. Drain the recoil housing. See page 81.

CAUTION

Starting the engine during the storage period will disturb the protective film

created by fogging and damage could occur. Never start the engine during

the storage period.

Summary of Contents for 2009 Hawkeye 2X4





























































































































Search results

Summary of Contents for 2009 Hawkeye 2X4

Reviews:

Related manuals for 2009 Hawkeye 2X4

Brands by name

Popular brands

Polaris 2009 Hawkeye 2X4, Owner'S Manual

Search results

Summary of Contents for 2009 Hawkeye 2X4

Reviews:

Related manuals for 2009 Hawkeye 2X4

Brands by name

Popular brands