Polaris 2009 Hawkeye 2X4 Owner'S Manual Download Page 64

Page: 64 / 124

MAINTENANCE

Oil and Filter Change

Always change the oil and filter at the intervals outlined in the Periodic

Maintenance Chart beginning on page 54. Always change the oil filter

whenever changing oil.
1. Position the vehicle on a level

surface.

2. Place the transmission in neutral.
3. Lock the parking brake.

4. Start the engine. Allow it to idle for

two to three minutes. Stop the engine.

5. Clean the area around the drain plug.
6. Place a drain pan under the vehicle.
7. Remove the drain plug. Use a 6 mm

Allen wrench.

8. Drain the oil.

9. Reinstall the drain plug with a new sealing

washer.

NOTE:

The sealing surfaces on the drain plug and

crankcase should be clean and free of

burrs, nicks or scratches.

10. Torque to specification. See page 60.

CAUTION

Hot oil can cause serious burns to skin. Do not allow hot oil to contact skin.

Summary of Contents for 2009 Hawkeye 2X4





























































































































Search results

Summary of Contents for 2009 Hawkeye 2X4

Reviews:

Related manuals for 2009 Hawkeye 2X4

Brands by name

Popular brands

Polaris 2009 Hawkeye 2X4, Owner'S Manual

Search results

Summary of Contents for 2009 Hawkeye 2X4

Reviews:

Related manuals for 2009 Hawkeye 2X4

Brands by name

Popular brands