Polaris 2009 Hawkeye 2X4 Owner'S Manual Download Page 45

Page: 45 / 124

OPERATION

Driving Safely

Driving Uphill

Whenever traveling uphill, follow these precautions:
1. Drive straight uphill.
2. Avoid steep hills (25

maximum).

3. Keep both feet on the footrests.
4. Shift your weight uphill.
5. Proceed at a steady rate of speed and throttle opening.
6. Remain alert and be prepared to take emergency action. This may

include quick dismounting of the vehicle.

WARNING

Braking and handling are greatly affected when operating in hilly terrain.

Improper procedure could cause loss of control or overturn and result in seri-

ous injury or death.
Avoid climbing steep hills (25

maximum).

Use extreme caution when operating on hills, and follow proper operating

procedures outlined in the owner's manual.

Maximum

Summary of Contents for 2009 Hawkeye 2X4





























































































































Search results

Summary of Contents for 2009 Hawkeye 2X4

Reviews:

Related manuals for 2009 Hawkeye 2X4

Brands by name

Popular brands

Polaris 2009 Hawkeye 2X4, Owner'S Manual

Search results

Summary of Contents for 2009 Hawkeye 2X4

Reviews:

Related manuals for 2009 Hawkeye 2X4

Brands by name

Popular brands