Polaris 2009 Hawkeye 2X4 Owner'S Manual Download Page 100

Page: 100 / 124

MAINTENANCE

Cleaning and Storage

Storage Tips

Fluid Levels

Inspect the fluid levels. Change fluids as recommended in the Periodic

Maintenance Chart beginning on page 54.
• Demand drive unit (front gearcase) (if equipped)
• Transmission
• Brake fluid (change every two years and any time the fluid looks dark

or contaminated)

Fog the Engine

1. Treat the fuel system with Polaris Carbon Clean. See page 97.
2. Support the front end of the machine so the engine is level or tilted

slightly rearward.

3. Remove the spark plug. Rotate the piston to BDC and pour two

ounces (59 ml) of engine oil into the cylinder.

4. Reinstall the spark plug. Torque to specification.
5. Apply dielectric grease to the inside of the spark plug cap. Reinstall

the cap.

6. Turn the engine over several times using the recoil starter. Oil will

be forced in and around the piston rings and ring lands, coating the

cylinder with a protective film of fresh oil.

7. If Polaris fuel system additive is not used, the fuel tank, fuel lines,

and carburetor should be completely drained of gasoline.

Summary of Contents for 2009 Hawkeye 2X4





























































































































Search results

Summary of Contents for 2009 Hawkeye 2X4

Reviews:

Related manuals for 2009 Hawkeye 2X4

Brands by name

Popular brands

Polaris 2009 Hawkeye 2X4, Owner'S Manual

Search results

Summary of Contents for 2009 Hawkeye 2X4

Reviews:

Related manuals for 2009 Hawkeye 2X4

Brands by name

Popular brands