Polaris 2005 Sportsman MV7, Service Manual

Page: 292 / 312

ELECTRICAL
10.36
FUEL SENDER TEST
1. Remove the fuel sender from the fuel tank. Refer
to Chapter 4 “FUEL SENDER
REMOVAL/INSTALLATION”.
2. Stand the fuel sender on a flat surface.
3. Hook up an ohm meter to the fuel sender harness
(Brown & Purple / White).
4. With the sender float in the empty position , the
meter should read 5 ohms .
5. Slowly lift the sender float to the full position , the
meter should now read 90 ohms .
6. If the reading are not between 5 ohms and 90
ohms , or if the reading is erratic, replace the fuel
sender.