Polaris 2005 Sportsman MV7, Service Manual

Page: 264 / 312

ELECTRICAL
10.8
2. Wait 5 seconds and then press the mode button in
until the wrench icon flashes. Press the mode button
again to set the desired service increment. Release
the button and wait for the wrench icon to stop
flashing. The new service interval is now set.
Screen 6: Miles/Kilometers toggle, The display in
the trip meter and odometer can be changed to
display either kilometers or miles. The current display
mode will be shown as “KM” or “MP”. To change, hold
in the mode button until the letters flash, then press
and release the button once. When the display stops
flashing, the mode has been set.
MP = Miles
Km = Kilometers
NOTE: As long as you are in the diagnostic mode, the
wrench icon will remain lit.
NOTE: To leave the diagnostic mode, turn the key
switch off and on.
NOTE: Any movement of the tires will trigger the
speedometer out of the diagnostic mode and into
standard display mode.
SPEEDOMETER REMOVAL
1. Remove the three screws that secure the
headlight pod cover and disconnect the wire
connectors from the instrument cluster.
2. Push the instrument cluster out from the backside
of the pod, while securely holding the pod.
Instrument Cluster
Pod
Push Instrument
Cluster Outward
Rubber Mount
NOTE: Do not remove the rubber grommet in the pod.
Only remove the rubber grommet if necessary.