19
EN
Operation in automatic mode
In automatic mode, the gate closes automatically after 30 seconds.
►
Precautions
For automatic operation, installation of the photocell set is necessary according to EN 12 453 (see
description and information on conductors on pages 22 and 23).
Polargos recommends installation of the orange light (see description and information on conductors on
pages 26 and 27) and the zone lighting (see information on conductors on page 27).
►
Operation in automatic mode (to switch on this mode, read the
information on page 20)
In automatic mode, the gate closes automatically after 30 seconds.
In case an obstacle is detected during closing, the gate stops and then opens completely. To close the gate, press
push-button 1.
Operation of the obstacle detection function
In case an obstacle is detected:
• during opening: the gate stops and carries out a short movement backwards,
• during closing: the gate stops and then it opens fully.
Operation of zone lighting
The zone lighting lights up every time when the drive is started. It goes out automatically after 1 minute and 30 seconds.
Gate
opening
by pressing push-button 1.
Automatic
gate
closing after 30
seconds.
Keeping of the gate in the open
position
by pressing push-button 1.
Automatic gate
closing
by renewed pressing
of push-button 1.
Crossing in front of the photocells will result in automatic gate closing
after 5 seconds.