30
EN
This element is not compatible with a solar energy supply.
Panel with digital code--------------------------------------
Remote control with 2 push-buttons----------------------------------------
Independent antenna-------------------------------------------
T1 C1 R1 V
R3 T2 C2 R2
T3 C3
H P2 M P1
+ H
E –
V
Connect:
• T1 and C1 of the panel with a digital code to the electronic module terminals 3 and 4 (yellow label „BUS”).
•
V and V of the panel with digital code to the electronic module terminals 5 and 6 (black label „24 V”).
An independent antenna with a longer range can
replace the wire antenna.
Place it on the post top and check to see if it is
exposed.
Connect the antenna to the electronic module
terminals 1 and 2 (blue label „ANT”):
• conductor core to terminal 1
• stranded aerial wire to terminal 2
Radio panel with code ------------------------------------
