4
EN
When the gate is completely open, keep a distance of 500 mm from its end.
After installation is finished, check the correct adjustment of the mechanism and proper operation of the safety
system and any devices used to switch off the system manually.
.
POLARGOS hereby declares that this product conforms to the basic requirements and other relevant regulations of
the Directive 1999/5/CE. The Declaration of Conformity is available at www.polargos.eu
This product is accepted for use in European Union and Switzerland..
*** example: intercom, key switch, code panel, etc.
PRODUCT DESCRIPTION
The drive unit is designed for cantilever gates used in residential properties.
Components of the set
Item
Name
Quantity
1
Shield
1
2
Antenna
1
3
Electronic module
1
4
Drive
1
5
Shield screw
1
6
Round gasket 9x2
1
7
Toothed bar 33 cm
13
8
Cable bush
1
9
Thread forming screw TCB M4x10, galvanized
3
10
Fan-shaped washer AZ4
1
11
Wire holder
1
12
Flat medium washer M4x10
1
13
Round insulated terminal D4
1
14
Assembly template (printed on cardboard)
to be cut out
1
15
Adhesive label for the electronic module
1
16
Remote control transmitter
1
Additional items to be provided by the user:
17
Nuts M10, galvanized
8
18
Flat washers 10.5x22x2, galvanized
8
19
Double-thread screw 10x15 mm
4
20
Pin 10x60 S12
4
Do not throw away unwanted devices or expired batteries together with household waste. Consumers
are obliged to transport all unwanted electronic and electric equipment to a special waste collection area
for their disposal and recycling.
