Plockmatic BOOKLET MAKER Pro 30, Operating Instruction

Page: 46 / 92

2
46
*Bleed Trim Conflict*
The trimmer of cut must be in-between 5 – 30mm.
This is determined by the settings of 3 parameters:
-The Width of the Booklet makers “Size”
parameter
-The “Width In” parameter.
-The “Image Offset” parameter.
Every time any one of these parameters is changed,
the resulting of cut is re-calculated.
Should any of the of cuts (on any side) be outside
the 5 – 30 mm interval, the warning for “Bleed Trim
Conflict” is displayed on the UI.
Remedy
Adjust any of these parameters to get the of cut within
the 5 – 30mm
Bleed Trimmer - Bleed Trim Conflict
On-line/Off-line
The Booklet maker can be operated in two modes. On-line mode, when used together with
the copier, or off-line mode, working as a stand-alone unit.
Off-line mode
Select correct paper size.
Open the Hand Feed Cover.
Insert the set and make sure to position the set within the two arrows.