manualshive.com logo in svg

Plockmatic BOOKLET MAKER Pro 30, Operating Instruction

The Plockmatic BOOKLET MAKER Pro 30 is a high-quality, reliable machine for creating professional booklets. Ensure optimal performance with the Operating Instruction manual, available for free download at manualshive.com. Maximize productivity and efficiency with this essential tool for any printing operation.

Share
Download
background image

2

37

If stapling was On, the first choice will be Off and vice 

versa.

Select On or Off with the [arrow] button and press the 

[OK] button.

Trimming

Selecting trimming On or Off

If trimming was On, the first choice will be Off and vice 

versa.

Select On or Off with the [arrow] button and press the 

[OK] button.

From the Ready screen, select Trim and press the 

[Change] button.

Stapling

Selecting stapling On or Off

From the Ready screen, select Staple and press the 

[Change] button.

Summary of Contents for BOOKLET MAKER Pro 30





























































































Reviews:

No comments

Related manuals for BOOKLET MAKER Pro 30

GBC GBC MultiBind 220 Instruction Manual preview
GBC MultiBind 220
Brand: GBC Pages: 74

Brands by name

Popular brands

Load more brands