Copyright Planika Sp. z o.o.
www.planikafires.com
IG0058#00
31.03.2017
30
Picture 4: Mounting of the front glass in the fireplace with two glasses
To mount the front glass in the devices with three glasses, you must:
•
Make sure the glass is clean, free from persistent dirt and fingerprints.
•
Carefully mount the suction cup in the middle of the glass.
•
Holding the glass at angle, insert its upper edge between the body of the fireplace and the horizontal fixing
strip (1).
•
Slide the glass upwards so that its lower edge is placed above the lower decorative frame “B” (2).
•
Push lower edge of the glass in the direction of the body of the fireplace so that the surface of the glass is in
vertical position.
•
Move the glass down and carefully set its bottom edge inside the horizontal handle (3).
•
Even out horizontally position of the front glass relative to the side walls so that the side edges of the front
glass comport with the vertical edges of the side walls.
•
Move the horizontal strip fixing the front glass to the right until it stops and tighten it with screws "A" (4).
•
Make sure that the screws are not tightened too much, because it can then lead to their breakage or damage
of the thread.
•
Remove the suction cup.
