Copyright Planika Sp. z o.o.
www.planikafires.com
IG0058#00
31.03.2017
31
Picture 5 – Mounting of the front glass in the fireplace with three glasses
11.3.
Dissassembly of the glass
To disassembly the front glass of the device, you should follow the above procedure in reverse order, appropriate for
the version of glazing.
If the device is a version equipped with side ceramic glass panes, they are not subject to removal during normal use
or during the installation of the device.
To remove the front glass of the device with the front glazing should:
•
Make sure the device is turned off, and the glasses are cooled down to room temperature.
•
Carefully mount the suction cup in the middle of the glass.
•
Remove the side pressure stripes „A” by lifting them up and moving them towards the center of the front glass
(1).
•
Unscrew the screws "B" pressing a horizontal strip "C" by holding the front glass (2).
•
Move the pressure strip to the left and then move down to dismantle it (3).
•
Lift the front glass vertically to the top so that its bottom edge is above the decorative frame "D" (4).
•
Drag the lower part of the front glass to each other so that its lower edge is beyond the contour of the housing
and decorative frame of the device (5).
•
Then by making a move down and then towards yourself, you should pull out the front glass and put it in a
safe place on a flat surface (6).
•
Remove the suction cup.
