Planika MONROE 900 F User Manual Download Page 34

Page: 34 / 36

www.planikafires.com

IG0058#00

31.03.2017

Picture 8 – Disassembly of the front glass in a fireplace with three glasses

12.

ENVIRONMENTAL PROTECTION

Packaging materials must be utilized in accordance with regulations. Batteries are considered to be small chemical

waste and should be disposed in special containers.

12.1.

The device

When the unit reaches the end of its life, you should proceed carefully, so the parts are suitable for reuse.

Before removing the device, you should do the following:

•

Close the gas valve.

•

Disconnect the 230 V AC.

•

Unscrew the cable connecting the device to the gas valve.

•

Remove the device.

Do not place the product in unsorted waste and take it to an official collection point for this type of waste. For this

purpose, please contact your local authorities for information about the available systems of delivery and acceptance

of this type of waste.

Summary of Contents for MONROE 900 F





































Search results

Summary of Contents for MONROE 900 F

Reviews:

Related manuals for MONROE 900 F

Brands by name

Popular brands

Planika MONROE 900 F, User Manual

Search results

Summary of Contents for MONROE 900 F

Reviews:

Related manuals for MONROE 900 F

Brands by name

Popular brands