Copyright Planika Sp. z o.o.
www.planikafires.com
IG0058#00
31.03.2017
15
Using the remote control this function can only be switched on and off. To enable or disable connected fan you should:
•
Go to Screen 3. Of the User Menu, by pressing and holding the button
for 2 seconds. Then briefly press twice the button
.
•
Enable or disable fan by pressing the arrow buttons on the remote
control
or
(„1” means activating and „0” deactivating).
Screen 3.
6.4.
The choice of control options
The remote control is configured by default to manual control mode. To use the time schedule, select the appropriate
option in the installation Menu (Chapter 7). After proper configuration in the installation Menu, features of the time
schedule will be available and you will be able to find them on the screen 4 (and subsequent) in the user Menu.
To make the choice of how to control a fireplace:
•
Go to Screen 4 of the User Menu, by pressing and holding the
button
for 2 seconds. Then briefly press three times the
button
.
•
There are three possible control modes of Fireplace control,
symbolized by two flashing symbols:
o
Manual control with adjustable flame height
o
Manual control with the temperaturę control,
o
Time schedule (temperaturę control).
Screen 4.
•
the desired way to control a fireplace you should select by pressing the arrow buttons
or
on the
remote control.
•
Leave the Menu by pressing a button
or after waiting five seconds of pressing last button.
6.5.
Date and time settings
In the Time Menu (Screen 5 User Manual) the following settings are available:
•
Time,
•
Day of the week,
•
Time schedule.
