27
Install all DOME boards first, then restart your system
before you install the driver initially.
Installing the Driver
To install the driver
1
Highlight Windows NT Workstation Version 4.00
[VGA mode]
at startup.
2
Log on with administrator privileges.
You need administrator privileges to change the
display settings.
3
Right-click the desktop, and select Properties >
Settings
.
The Settings tab appears.
4
Click Display Type….
The Display Type dialog box appears.
5
Click Change… in the Adapter Type section of
the dialog box.
The Change Display dialog box appears.
Windows NT 4.0 Driver
Install the M2/PCI board and connect it to the display before
you install this driver. Failure to do so may cause problems
with the installation.
