Installing the Driver | 15
To install the driver for an additional board
1
Turn off the power to your computer.
If you leave the computer turned on, you might suffer
electric shock or cause damage to both the computer
components and the M2 board.
2
Disable VGA on the additional board, and install it
following the precautions and installation steps on
pages 3 to 8.
3
Check that all displays are connected and powered on.
4
Log on with administrator privileges.
5
Click No to exit the Wizard.
6
Run Setup.exe to modify the existing configuration.
(See steps 2 to 6 on page 14.)
7
Enable your display and set the resolution.
(See page 16.)
The Windows Hardware Wizard reports its location of
new hardware and displays the Digital Signature Not
Found dialog box.
For proper installation, you must quit the Wizard and
run the DOME Setup function. This executable installs
the correct number of heads for the new board.
