50 | Solaris Driver
3
Insert the DOME M2 Drivers for Solaris CD into
the CD drive.
4
Mount the CD device if your system does not automount it.
Then type:
cd /cdrom/dome
5
To transfer the software packages to the system, type:
pkgadd -d m2pciZZZ.pkg
where
ZZZ
is the version number.
For example, for version 1.0.0, type:
pkgadd -d m2pci100.pkg
.
This message appears:
The following packages are available:
1 DOMEm2
DOME M2 Display Support (sparc) 1.x.x
2 DOMEmdlib
DOME MD library (sparc) 1.1.x
Select package(s) you wish to process (or ‘all’ to
process all packages). (default:all)
[?,??,q]:
6
Press <Return> to install all packages or the number 1 (one)
to install the
DOMEm
2
package only.
Messages appear, followed by this prompt:
Do you want to continue with the installation of
the package [y,n,?]
7
Type
y
.
Messages describe the progress of the installation. Then
these messages appear:
Installation of <DOMEm2> was successful.
Installation of <DOMEmdlib> was successful.
You do not need to reboot your computer.
8
Set up the system for stereo display, if necessary. (See
page 51.) Or, configure the display. (See page 55.)
