74 | Appendix A
To customize or add modes
1
Connect a monitor to your installed DOME board,
if necessary.
2
Return to the Settings tab, and select the test display from
the Display list.
3
Make sure Extend my Windows desktop onto this monitor
is selected, and click Apply.
The display extends to the selected test display.
4
Select Advanced > DOME tab > Custom Mode.
5
Highlight the Resolution of the mode you want to change.
6
Edit the Mode Values section of the dialog box to create
the mode you want.
7
Click Test.
The Display Resolution dialog box appears. The system
is about to test the customized resolution.
8
Click OK to test the mode, or Cancel to abort testing.
You must test a mode before you can save it.
The test pattern displays on the screen you selected in
the Settings tab.
A message appears indicating that the new mode is
about to be tested.
9
Click OK.
Do not test custom modes on the primary display or any
sister devices attached to the primary display.
