Pitney Bowes Relay 2500 User Manual Download Page 48

Page: 48 / 182

Running a Trial Piece

Run a trial piece to test the job settings.

1. Load material and tap the

Trial Piece

button on the menu.

NOTE

: When the first job is run after powering up the system, the touchscreen displays the

message "Check / Clear Accumulator." This is to verify there are no pages staged in the
accumulator area. If this message is displayed:

a. Open the accumulator cover to check for pieces.
b. Remove any material.
c. Close the cover and tap

Trial Piece

2. Assess the unsealed trial piece to make sure everything inside the envelope is correct. If you need

to make changes to the settings:

a. Tap the

Setup

button on the main screen.

b. Log in with Supervisor password (71).

c. Tap the

buttons to scroll to the setting you wish to modify.

d. Tap the

and

–

buttons to scroll to the desired option.

3. When the setup changes are complete, tap the

Setup

button to accept the new settings and return

to run mode. The inserter saves the job with the new settings.

4. Run another trial piece to test the modified settings.

NOTE

: Any time you modify settings you must run a trial piece.

Running trial pieces with linked feeding

When a trial piece is requested for a job where linked feeding is enabled, both feeders must be loaded, as
a trial piece will feed from each feeder. Two trial pieces are produced.

Product Overview

Pitney Bowes

Relay™ 2500, 3500, 4500 User Guide

December, 2018

Page 41 of 174

Summary of Contents for Relay 2500






















































































































































































Search results

Summary of Contents for Relay 2500

Reviews:

Brands by name

Popular brands

Pitney Bowes Relay 2500, User Manual

Search results

Summary of Contents for Relay 2500

Reviews:

Brands by name

Popular brands