Pitney Bowes ADDRESSRIGHT DA500 Operator'S Manual Download

Page: 90 / 135

Appendix A • Control Panel Menus

A-10

Pitney Bowes DA500/DA550 Operator Guide

To use the Address Layout option:

1. Press the ON LINE button until the display reads

OFF LINE.

2. Press the Menu button to display the Main

Menu.

3. Press the + or - buttons to scroll through the

Main Menu options until the address layout
option appears on the LCD panel.

4. Press the Enter button to select this option.

5. Press the

–

buttons to scroll through the

address layout options.

6. Press the Enter button to select the desired

option (A, B, C, D or E).

7. Press the + or - buttons to scroll through the

choices associated with each option.

8. When you’ve finished making selections, press

the menu button several times to back out of the
menu until the printer displays OFF LINE. Then
press the ON LINE button to enable the printer.

1. Address
Layout
(continued)

Summary of Contents for ADDRESSRIGHT DA500








































































































































Search results

Summary of Contents for ADDRESSRIGHT DA500

Reviews:

Related manuals for ADDRESSRIGHT DA500

Brands by name

Popular brands

Pitney Bowes ADDRESSRIGHT DA500, Operator'S Manual

Search results

Summary of Contents for ADDRESSRIGHT DA500

Reviews:

Related manuals for ADDRESSRIGHT DA500

Brands by name

Popular brands