Pitney Bowes ADDRESSRIGHT DA500 Operator'S Manual Download

Page: 83 / 135

Appendix A • Control Panel Menus

Pitney Bowes DA500/DA550 Operator Guide

A-3

The DA500/DA550 has two menus, both displayed on
the LCD:

•

Use the Main Menu to control how your printed
material looks.

•

Use the Setup Menu to configure your printer so
it will function correctly with your computer.

NOTE: The printer must be OFF LINE to access the
menu options.

Using the
Menus

Menu

Displays the options on the Main
Menu and the Setup Menu. The
printer must be OFF LINE to
access the menus.

Enter

Press to select the currently
displayed menu option.

Car(plus)

With the printer OFF LINE , press
to move the ink cartridge holder t
o the center of the printer. This
makes it easy to remove the car
tridge.

With the printer ON LINE , press
to scroll forward through the
menu options.

est Env.

Prints a test envelope. This is very
useful when you set up a print
job.

Using the
Control Panel
(continued)

Summary of Contents for ADDRESSRIGHT DA500








































































































































Search results

Summary of Contents for ADDRESSRIGHT DA500

Reviews:

Related manuals for ADDRESSRIGHT DA500

Brands by name

Popular brands

Pitney Bowes ADDRESSRIGHT DA500, Operator'S Manual

Search results

Summary of Contents for ADDRESSRIGHT DA500

Reviews:

Related manuals for ADDRESSRIGHT DA500

Brands by name

Popular brands