Pitney Bowes ADDRESSRIGHT DA500 Operator'S Manual Download

Page: 105 / 135

Appendix A • Control Panel Menus

Pitney Bowes DA500/DA550 Operator Guide

A-25

The purging process clears any clogged ink on the print
nozzle. Often this will return the print quality to a normal
level.

To select this option:

1. Press the + or – buttons to scroll through the

Setup Menu options until 3. PURGE TEST HEAD
appears on the LCD panel.

2. Press the Enter button to select this option.

3. To select Purge Print Head cycle, press Enter

when the “Purge Print Head?” message dis-
plays.
This option can be enabled by pressing the +
button (YES) or disabled by pressing the –
button (NO). If enabled, the printer will display
“Please wait...Ink Jets being purged”.

4. Press the Menu button to back out of the menu

until the printer displays “OFF LINE ”. Then
press the ON LINE button to enable the printer.

3. Purge Print
Head

Summary of Contents for ADDRESSRIGHT DA500








































































































































Search results

Summary of Contents for ADDRESSRIGHT DA500

Reviews:

Related manuals for ADDRESSRIGHT DA500

Brands by name

Popular brands

Pitney Bowes ADDRESSRIGHT DA500, Operator'S Manual

Search results

Summary of Contents for ADDRESSRIGHT DA500

Reviews:

Related manuals for ADDRESSRIGHT DA500

Brands by name

Popular brands