Listening to your system
06
61
En
English
Français
Deutsch
Nederlands
Italiano
Español
Using Front Stage Surround
Advance
The Front Stage Surround Advance function
allows you to create natural surround sound
effects using just the front speakers and the
subwoofer.
•
While listening to a source, press
, then press STEREO to select Front
Stage Surround Advance modes.
•
STEREO
– See
Listening in stereo
on
page 60 for more on this.
•
F.S.SURR FOCUS
– Use to provide a rich
surround sound effect directed to the
center of where the front left and right
speakers sound projection area converges.
•
F.S.SURR WIDE
– Use to provide a
surround sound effect to a wider area than
FOCUS
mode.
1
Using Stream Direct
Use the Stream Direct modes when you want
to hear the truest possible reproduction of a
source. All unnecessary signal processing is
bypassed, and you’re left with the pure analog
or digital sound source.
•
While listening to a source, press
, then press AUTO/ALC/DIRECT to
select the mode you want.
2
Check the digital format indicators in the front
panel display to see how the source is being
processed.
•
AUTO SURROUND
– See
Auto playback
on page 58.
•
ALC
– Listening in Auto level control mode
(page 58).
•
DIRECT
– Plays back sound from the
source with the least modification next to
PURE DIRECT
. With
DIRECT
, the only
modifications added to
PURE DIRECT
playback are calibration of the sound field
by the MCACC system and the Phase
Control effect.
•
PURE DIRECT
– Plays back unmodified
sound from source with only minimal
digital treatment. No sound is output from
the Speaker B in this mode.
Tip
• When an ALC mode is selected, the effect
level can be adjusted using the
EFFECT
parameter in
Setting the Audio options
on
page 69.
Note
1 When using
F.S.SURR WIDE
, a better effect can be obtained if the
Full Auto MCACC
procedure under
Advanced
MCACC
is performed. For more on this, refer to
Automatically conducting optimum sound tuning (Auto MCACC)
on
page 41.
RECEIVER
FOCUS
position
(Recommended)
WIDE
position
Front left
speaker
Front right
speaker
Front left
speaker
Front right
speaker
2 When headphones are plugged in, the AUTO SURROUND and DIRECT are cannot be selected.
RECEIVER
VSX-1020_FLXCN.book 61 ページ ２０１０年４月１５日 木曜日 午後４時１０分
