The System Setup and Other Setup menus
11
103
En
English
Français
Deutsch
Nederlands
Italiano
Español
Speaker Setting
Use this setting to specify your speaker
configuration (size, number of speakers and
crossover frequency). It is a good idea to make
sure that the settings made in
Automatically
conducting optimum sound tuning (Auto
MCACC)
on page 41 are correct. Note that this
setting applies to all MCACC presets, and
cannot be set independently.
1
Select ‘Speaker Setting’ from the
Manual SP Setup menu.
2
Choose the set of speakers that you want
to set, then select a speaker size.
Use
/
to select the size (and number) of
each of the following speakers:
1
•
Front
– Select
LARGE
if your front
speakers reproduce bass frequencies
effectively, or if you didn’t connect a
subwoofer. Select
SMALL
to send the bass
frequencies to the subwoofer.
•
Center
– Select
LARGE
if your center
speaker reproduces bass frequencies
effectively, or select
SMALL
to send bass
frequencies to the other speakers or
subwoofer. If you didn’t connect a center
speaker, choose
NO
(the center channel is
sent to the front speakers).
•
FH
– Select
LARGE
if your front height
speakers reproduce bass frequencies
effectively, or select
SMALL
to send bass
frequencies to the other speakers or
subwoofer. If you didn’t connect front
height speakers, choose
NO
(the front
height channel is sent to the front
speakers).
2
•
FW
– Select
LARGE
if your front wide
speakers reproduce bass frequencies
effectively, or select
SMALL
to send bass
frequencies to the other speakers or
subwoofer. If you didn’t connect front wide
speakers, choose
NO
(the front wide
channel is sent to the front speakers).
3
•
Surr
– Select
LARGE
if your surround
speakers reproduce bass frequencies
effectively. Select
SMALL
to send bass
frequencies to the other speakers or
subwoofer. If you didn’t connect surround
speakers choose
NO
(the sound of the
surround channels is sent to the front
speakers or a subwoofer).
•
SB
– Select the number of surround back
speakers you have (one, two or none).
4
Select
LARGEx2
or
LARGEx1
if your
surround back speakers reproduce bass
frequencies effectively. Select
SMALLx2
or
SMALLx1
to send bass frequencies to
the other speakers or subwoofer. If you
didn’t connect surround back speakers
choose
NO
.
Note
1 If you select
SMALL
for the front speakers the subwoofer will automatically be fixed to
YES
. Also, the center, surround,
surround back, front height and front wide speakers can’t be set to
LARGE
if the front speakers are set to
SMALL
. In
this case, all bass frequencies are sent to the subwoofer.
2 • You can only adjust the front height speakers when
Speaker System
is set to
Normal(SB/FH)
.
• If the surround speakers are set to
NO
, the front height speakers will automatically be set to
NO
.
3 • You can only adjust the front wide speakers when
Speaker System
is set to
Normal(SB/FW)
.
• If the surround speakers are set to
NO
, the front wide speakers will automatically be set to
NO
.
4 • If you selected
ZONE 2
or
Front Bi-Amp
(in
Speaker system setting
on page 102) you can’t adjust the surround back
settings.
• If the surround speakers are set to
NO
, the surround back speakers will automatically be set to
NO
.
• If you select one surround back speaker only, make sure that speaker is hooked up to the left surround back
terminal.
VSX-1020_FLXCN.book 103 ページ ２０１０年４月１５日 木曜日 午後４時１０分
