Basic playback
05
53
En
English
Français
Deutsch
Nederlands
Italiano
Español
2
Press T.EDIT (TUNER EDIT).
The display shows
PRESET MEMORY
, then a
blinking memory class.
3
Press CLASS to select one of the seven
classes, then press PRESET
/
to select the
station preset you want.
You can also use the number buttons to select
a station preset.
4
Press ENTER.
After pressing
ENTER
, the preset class and
number stop blinking and the receiver stores
the station.
Naming station presets
For easier identification, you can name your
station presets.
1
Choose the station preset you want to
name.
See
Listening to station presets
below for how
to do this.
2
Press T.EDIT (TUNER EDIT).
The display shows
PRESET NAME
, then a
blinking cursor at the first character position.
3
Input the name you want.
Choose from the following characters for a
name up to eight characters long.
ABCDEFGHIJKLMNOPQRSTUVWXYZ
abcdefghijklmnopqrstuvwxyz
0123456789
!”#$%&’()
∗
+,–./:;<=>?@[ \ ]^_{|} ˜
[space]
Use
/
to select a character,
/
to set the
position, and
ENTER
to confirm your selection.
Tip
• To erase a station name, simply repeat
steps 1 to 3 and input eight spaces instead
of a name.
• Once you have named a station preset, you
can press
DISP
when listening to a station
to switch the display between name and
frequency.
Listening to station presets
You will need to have some presets stored to
do this. See
Saving station presets
on page 52
if you haven’t done this already.
1
Press TUNER to select the tuner.
2
Press CLASS to select the class in which
the station is stored.
Press repeatedly to cycle through classes A to
G.
3
Press PRESET
/
to select the station
preset you want.
• You can also use the number buttons on
the remote control to recall the station
preset.
VSX-1020_FLXCN.book 53 ページ ２０１０年４月１５日 木曜日 午後４時１０分
