Pioneer PDP-42MXE10, Service Manual

Page: 95 / 184

PDP-425CMX
95
5 6 7 8
5 6
7
8
C
D
F
A
B
E
Note 1 : Temperature information is not actual temperature for A/D value from the temperature sensor IC.
Conversion expression: Temperature information (TEMP 0/TEMP 1)
×
1.255-50.44= temperature ( ºC )
Note 2 : Maximum recording time is 279620 hours 16 minutes. When exceeded maximum recording time, reset to zero.
[QS2]: To acquire data on the panel operation information
Order Data Contents Size Remarks
1 STX 1Byte 02hex
2 Command echo back 3Byte QS2 (fixed)
3 Standby operation shift notice 1Byte 0: STB shift NG 1: STB shift OK
4 Main unit adjustment flag 1Byte 0: Adjustment is completed 1: Adjustment is not completed
5 Adjustment backup flag 1Byte 0: Exist 1: Nothing
6 PD information-1st 1Byte
0: no PD 2: POWER 3: SCAN 4: SCAN-5V 5: Y-DRV
6: Y-DC/DC 7: Y-SUS 8: ADRS 9: X-DRV A: X-DC/DC
B: X-SUS C: DC/DC conveter D: ASTRA PD
E: V-ADDRS F: Unknown
7 PD information-2nd 1Byte
8 Temperature information (TEMP0) 3Byte Note 1
9 Temperature information (TEMP1) 3Byte Note 1
10 SD category 1Byte
0: no SD 1: ASTRA communication error 2: IIC communication error
3: RST2 abnormality 4: Temperature abnormality 6: no SD
11 SD subcategory 1Byte
0: There is no subcategory 1: General purpose EEPROM
2: BACKUP EEPROM 3: DAC IC 4: AUDIO 5: DVI 6: TEMP IC
12 Operating state with SD 1Byte 1: Normally 2: Relay OFF completion 3: Warning
13 HOUR METER
6Byte 000000 - 279620 (time) Note 2
2Byte 00 - 59 (minutes) Note 2
14 MASK display state 1Byte 0: MASK OFF 1: MASK ON
15 Aging state 1Byte
16 Check sum 2Byte
17 ETX 1Byte 03hex
[QIP]: To acquire data on the other panel information
Order Data Contents Size Remarks
1 STX 1Byte 02hex
2 Command echo back 3Byte QIP (fixed)
3 Serial number 15Byte 15 columns of character string
4 HOUR METER
6Byte
As the same contents as item 13 of QS2 command
2Byte
5 BACKUP HOUR METER
6Byte
As the same contents as item 13 of QS2 command
2Byte
6 POWER ON COUNTER 8Byte 00000000 - 99999999
14 Check sum 2Byte
15 ETX 1Byte 03hex
[QAJ]: To acquire data on the panel adjustment value
Order Data Contents Size Remarks
1 STX 1Byte 02hex
2 Command echo back 3Byte QAJ (fixed)
3 V-SUS adjustment value 3Byte 000 - 255
4 V-OFT adjustment value 3Byte 000 - 255
5 V-RST-P adjustment value 3Byte 000 - 255
6 XSB adjustment value 3Byte 120 - 136
7 YSB adjustment value 3Byte 120 - 136
8 YTG adjustment value 3Byte 120 - 136
9 YTW adjustment value 3Byte 120 - 136
10 RSW adjustment value 3Byte 120 - 136
11 R-RIVICE setting value 1Byte 0 - 7
12 G-RIVICE setting value 1Byte 0 - 7
13 B-RIVICE setting value 1Byte 0 - 7
14 Check sum 2Byte
15 ETX 1Byte 03hex